Commercial Pleated Blinds
A versatile choice which can be moved to any position over the glazing.
Design
Pleated blinds can be made to pull up from the window sill or so that it’s free floating meaning it can be moved to any position over the glazing. As these blinds are held under light tension they are ideal for use on opening windows and, because they are fitted close to the glazing, you can still use your sill.
The fabric of the blind is usually in 20mm or 25mm pleats and when it is retracted the fabric folds up into a neat stack out of the way. The fabric is attached to aluminium rails.
There is an extensive range of fabrics available many with heat reflective coatings.
Operation
Like many blind styles, pleated blinds can be manually or electrically operated using low voltage motors.
For roof blinds the pleated fabric provides strength so it can be cut to suit areas of shaped glazing. In this situation the blinds tend to be operated by a telescopic rod but motorisation via low voltage motors and remote control is also available.
Window blind safety
The BBSA recommends using blinds which do not contain operating cords or chains, or which have concealed tensioned cords. These products are ‘safe by design’ and are widely available. For more information visit www.makeitsafe.org.uk.
Comfort and energy saving
Blinds are a proven way of keeping internal conditions cooler in the summer and warmer in the winter. For more information contact your local BBSA member.
Click here to find your local BBSA members.
Looking for something else?